Marantz 2275 Integrated Stereo Receiver

-

Description

NOT FOR SALE – YET!!

The Marantz 2270 was the standard by which all others compared their receivers. It’s successor, the 2275 carries that comparison one step further. The 2275 boasts of a Phase-Lock-Loop FM Multiplex Demodulator to assure maximum separation with a minimum of distortion. The Multipath Indicator tells you the best position of your FM antenna. The Variable Turnover Tone Controls provides flexibility for contouring the sound that is far superior to anything previously available. Plus, there’s a unique Dolby De-emphasis Switch for use with an external adaptor to accommodate Dolby FM broadcasts. There are complete facilities for two tape recorders with the ability to “dub” from either one to the other. And the pre-out main-in jacks permit convenient use of any external device such as an equalizer or electronic cross-over. The direct-coupled full complementary amplifier output circuitry assures crystal clear highs and solid lows.

The 2275 boast a full complement of Inputs and Outputs in addition to the standard phono and auxiliary inputs, two sets of tape inputs and outputs are provided to facilitate copying from one tape deck to another. Front panel dubbing jacks allow you to add a third tape deck without disrupting any rear panel connections.

The preamp-out/main-in jacks on the rear panel enable you to use the preamplifier and amplifier sections independently. You get simplified connection of external components such as noise reduction systems, equalizers and electronic crossovers – and the ability to use the receiver’s preamp section to drive a separate power amplifier. Here’s another benefit: Connecting the preamp section directly to a tape deck enables you to make specially equalized recordings by using the preamp’s flexible tone controls.

This unit has a new, rare black faceplate and a gloss black case.  It sounds great and looks beautiful.

Specifications:

  • Tuning range: FM, MW
  • Power output: 75 watts per channel into 8Ω (stereo)
  • Frequency response: 20Hz to 20kHz
  • Total harmonic distortion: 0.25%
  • Damping factor: 60
  • Input sensitivity: 1.8mV (MM), 180mV (line)
  • Signal to noise ratio: 82dB (line)
  • Output: 1V (Pre out)
  • Dimensions: 439 x 137 x 366mm
  • Weight: 17.7kg
  • Year: 1974

 

Additional information

Weight 43 lbs
Dimensions 20 × 20 × 20 in